How to Reset Ring Doorbell 2 Effortlessly In Seconds

How to Reset Ring Doorbell 2 Effortlessly In Seconds

The Ring Doorbell 2 has become an essential part of my Smart Home. The ease of checking who’s at your door from your smartphone never gets old.

You are reading: How to Reset Ring Doorbell 2 Effortlessly In Seconds

Unfortunately, my experience with it has not been all sunshine and roses.

A while after I started using my Ring Doorbell 2, I noticed a drop in its performance.

Although all devices become slower as you keep using them, I was not expecting it from my Ring Doorbell.

I was pretty reliant on my Ring Doorbell and got worried about having to replace it.

So I went online to try out all the troubleshooting options there were. After nothing worked, I decided just to reset my Ring Doorbell.

As with most electronic devices, if something is wrong with the settings, resetting usually fixes whatever issue plagues the device.

So, how do you reset your Ring Doorbell 2?

You can either factory reset your device via the Ring app, or you can perform a hard reset by removing the faceplate and holding down the black button in front of the camera for 15 seconds.

When Should You Reset Your Ring Doorbell 2?

In general, I’d avoid resetting devices that have been set up to work the way I like them, but the Ring Doorbell 2 itself does not store much information, which means you can reboot your Ring Doorbell without fear.

It does not offer many personalization settings, making it easier to reset.

Once the device is reset, you do not lose any essential data. The device only keeps a log of the number of times your doorbell is pressed and the times when its motion sensors were triggered.

That isn’t vital information, so there’s nothing to worry about.

Resetting the device helps, and sometimes, it may be the only option that you have.

Usually, most software issues can be fixed by resetting the device, and it is useful when you are planning on selling your Ring device. 

Getting out of Setup Mode

When you are initially setting up your Ring Doorbell 2, it will ask you to put the device into Setup Mode.

In this mode, it is easier for your Ring Device to connect to your home network.

Once it is connected to the network, your Ring Device should be out of the Setup Mode.

If the device cannot get out of the Setup mode, you will need to reset it, and then reprogram your Ring Doorbell.

Fixing Connectivity Issues

No technology can be error-free. While the Ring Doorbell is durable with top-notch software, it can malfunction as well.

With time, you may notice a few minor issues with your Ring Doorbell 2, and to fix them, you may try out a few troubleshooting methods.

Article post on:

While most of the time, these methods work out, sometimes they can be disappointing.

If you have exhausted all other methods of trying to fix your Ring Doorbell 2 while keeping the data in it intact, then the last step would be to reset the device.

Resetting the Ring Doorbell 2 always helps when you are facing connectivity issues.

If your device seems to be out of the Wi-Fi range no matter where you move or doesn’t connect to your smartphone, resetting your device may help.

Clearing Your Data before selling your Ring Doorbell

In case you are looking for an update on your Ring Doorbell 2, you may decide to sell your previous Ring device.

In this case, you will need to ensure that all of your private data is deleted from the device before you can pass it on to the next owner.

Although you may carefully vet the person to whom you sell your Ring device, the Ring Doorbell 2 still holds some vital and private information that you do not want others to see.

When you plan on selling off your Ring device, make sure that you perform a hard reset or change its configurations back to factory settings to erase all the data stored.

How to Factory Reset your Ring Doorbell 2

Before you perform a hard reset on your Ring Doorbell 2, it is best to consider factory resetting your device first.

Factory resetting your Ring doorbell is more convenient and takes less time and effort.

Article post on:

To factory reset your Ring Doorbell 2 device, here is what you need to do:

  1. Go to the Ring app on your phone
  2. Go to the list of available devices and then select the Ring Doorbell 2 device
  3. After selecting the device, go to the top-right corner of the screen, and tap on the settings icon
  4. On the drop menu, select the Remove Device option
  5. Select the Delete option on the dialogue box that pops up

After you have successfully removed the Ring Doorbell 2 from your app, you can set it up as you initially had to start using the device from your phone.

In case you are locked out of your Ring app, try deleting and then installing the app again.

How to Hard Reset your Ring Doorbell 2

If the problem persists even after a factory reset, or you are unable to access the Ring app at the moment, you should hard reset your Ring Doorbell.

Here are the steps you should follow to hard reset your Ring Doorbell device:

  1. Ensure that your Ring doorbell is charged fully
  2. Remove the faceplate from your device carefully by removing the safety screws with a screwdriver.
  3. Look for a black button in front of the camera. This is the reset button.
  4. Press and hold this button down for 15 seconds
  5. Once you release the button, the device will flash a light for a few seconds to indicate that the device is restarting.

Once the device has restarted, you will need to put it in Setup mode to connect your device to your home network.

You can put it into the setup mode by pressing the black reset button in front of the camera.

Removing the Ring Doorbell 2 from its mount

If you plan to remove your current Ring Doorbell 2 device, you will need to ensure that you get it off the mount carefully.

When you want to remove your Ring Doorbell 2 device from the mount, here is what you need to do:

  1. Use a screwdriver and carefully remove the two safety screws located at the bottom of the device 
  2. Slide up and remove the device from the mount
  3. To remove the mount, unscrew the four screws on the mount
  4. Once you have taken all the screws out, you can take the mount off the wall.

Removing your Ring Doorbell 2 from its mount is not complicated and can be done quickly.

Once you have removed the Ring Doorbell 2 from its mount, you can replace it with a newer version of the Ring Doorbell or any other household doorbell.

Final Thoughts on Resetting your Ring Doorbell

Sometimes, the only way to guarantee that your Ring Device continues to function correctly is to reset it.

Once I got my Ring Doorbell 2, I experimented with it quite a bit, installing it without a pre-existing doorbell, installing it on my door, even trying to use it without a subscription. I’ve had to reset it a fair number of times.

Whether it is to get out of the setup mode or fix connectivity issues with the device, resetting the device can be useful.

You can reset the device using two methods, either opting for a factory reset or a hard reset.

A factory reset may be a better option, as it is faster and easier than hard resetting your device.

This problem was a lot easier to solve than the time my Ring Doorbell wouldn’t connect to Wi-Fi or the time Ring doorbell wouldn’t ring.

Once you have successfully reset your device and it’s back to its usual performance level, you can go back to enjoying all that it offers.

There’s a lot that your Ring Device lets you do, such as accessing live videos from your Ring Doorbell on your smartphone app or speaking to visitors through your Ring Doorbell 2, no matter where you are.

You May Also Enjoy Reading:

  • How Long Does Ring Doorbell Battery Last? [2021]
  • Ring Doorbell Flashing Blue: How To Fix In Minutes
  • Ring Doorbell Delay: How To Fix In Minutes
  • Ring Doorbell Not Charging: How to Fix in Minutes
  • Can You Change Ring Doorbell Sound Outside?

Frequently Asked Questions

How do I get my ring doorbell back online?

When facing connectivity issues, it can be a problem with your home network or your battery’s power source.

To troubleshoot this issue here is what you can do:

  1. Open the Ring app on your phone
  2. Go to the Devices option
  3. Select your Ring Doorbell device
  4. Select the Device Health option present at the bottom of your screen
  5. To confirm if it is a power issue, select Power Status to check whether your device has sufficient charge
  6. To check if the problem is with your network, tap on Reconnect to Wi-Fi or Change Network option.

If issues persist, you can try resetting the device.

Why does it take so long for my ring doorbell to activate?

If your Ring device takes a long time to set up, you can check whether your internet connectivity is good and whether your device is within the range.

Sometimes the Ring Doorbell 2 may take a long time to activate because it is still in the setup mode.

In such cases, you may want to try resetting your device.

Can Ring notify two phones?

To get Ring notifications on two devices, download the Ring app on both devices and enter the required credentials.

How do I change the WIFI network on my ring doorbell 2?

To change the Wi-Fi network on your Ring Doorbell 2, here are the steps to follow:

  1. Go to the Ring app on your phone
  2. Go to the list of devices
  3. Tap on your Ring Doorbell 2 device
  4. Go to the bottom of the screen and select Device Health
  5. Now, opt for Change Network and choose the name of the network you want to connect to.
  6. Enter the required credentials to connect to the network.

Category: How to at

Article post on: