- What Is A Car Battery? – Reset A Car Computer After Replacing Battery
- When It Should Be Replaced? – Reset A Car Computer After Replacing Battery
- What Is An ECU?
- Symptoms Of A Bad ECU
- Check Engine Light
- Engine Misfiring – Reset A Car Computer After Replacing Battery
- Engine Does Not Like To Start
- Performance Loss
- How To Reset Car Computer After Replacing Battery Simple?
- Remove The Positive Terminal
- Resetting A Car Computer With An OBD2 Scanner
- Take Your Car To Be Diagnosed – Reset A Car Computer After Replacing Battery
- Reset Car Computer After Replacing Battery Cost?
- Conclusion – Reset A Car Computer After Replacing Battery
- Approved Tools
Are you having a problem reset a car computer after replacing battery? If this is the case you are at the right place. After replacing the car battery, the car computer can be annoyed and can throw an error or two and display a check engine light on the dash. In this article, we are going to explain to you how to handle these problems quickly and effectively.
You are reading: Reset Car Computer After Replacing Battery – How To Do It?
- What Is Battery?
- What Is ECU?
- Bad ECU Symptoms
The car computer has to be reset when you make changes to the components in your vehicle that are connected with the computer. But why should the computer be reset? The computer has to be restarted and returned to the factory settings to be able to learn the new settings and the check engine light to be removed from your dash.
Some computers are self-learning and they remove all the error messages from your dash, while other car computers need to be reset for them to continue work properly. In this article, we are going to help you out in doing precisely that. Because this is a problem that is troubling a ton of car owners that don’t know what to do in this situation. But we are going to clarify everything for you.
In this article, we are going to explain everything you need to know when it comes to this problem of reset car computer after replacing battery. First, we will start from the basics and then we will move forward and explain how to reset car computer after replacing battery. Then we will discuss the costs of doing this. So, without further ado, let’s dive into the article.
What Is A Car Battery? – Reset A Car Computer After Replacing Battery
The car battery is the battery that helps you start your car and power the accessories in your vehicle. The battery is a simple design that has been with us for more than 100 years and is still the number one choice when it comes to internal combustion engines.
The car battery is storing electricity that is produced by the alternator. The alternator is powered by the serpentine belt. Then this energy is used to do the initial start of the engine and also power accessory units like a radio or the dome lights. Without batteries, it will almost be impossible to crank the car.
There are still ways to crank an engine without a battery, but that would be going back in time and trying some manual methods. And you don’t want that. That’s why the batteries were invented to ease the use of cars and make driving more enjoyable.
The average six-cell battery that cars are using is usually rated at somewhere between 12 to 13.5V of power. This battery power is enough to start most cars and pickup trucks. The bigger the truck or car the bigger the battery is needed to start the car.
Yeah, but how to reset car computer after replacing battery? We are going to discuss that topic later in this article. After we cover the ECU, these things have to be clarified before we move on to some more complex topics.
When It Should Be Replaced? – Reset A Car Computer After Replacing Battery
As with other components in our cars, the battery has a lifespan. On average a battery lasts for 2 to 5 years. The more you drive your car and the more the battery charges the longer it will last.
What is killing a battery is if the car is driven less frequently. This allows for the internals of the battery to lose their characteristics. This affects the battery health and it tends to degrade and lose its juice much quicker than if the car is driven regularly.
That’s why you should drive your car more often and make sure that your battery is in good health. Diving like this will make it last for 4+ years with no problems.
Also, if your battery is relatively old, you should replace it as a preventive measure. Because it can fail all of a sudden and you might end up stranded on the side of the road. That’s why you should bear this in mind.
Also, it is useful to have a multimeter and measure the battery capacity every now and then. This multimeter tool is going to tell you a lot when it comes to your battery and how much life has in it. A good battery usually has more than 12V of power. But if the voltage is lower then this can mean that there are some issues with the battery on your car.
In this case, you will have to replace the battery and then look to reset car computer after replacing battery. That is something that we are going to cover a bit later in this article. But first, let’s learn what is an ECU?
What Is An ECU?
The ECU is the car’s computer. Modern cars have computers inside that regulate everything. Without this computer, driving a modern car would be impossible and the car will not run.
The ECU is giving directions to different components on what to do and also gathers a lot of information from sensors and other measuring tools to adjust the running of the car based on the conditions.
The positive side of the ECU is that it observes and adapts, it’s like a human brain inside of your car. The ECU is so smart that reads all the data from the sensors and goes through all of this data and then adjusts the operation of the engine based on this information.
When the ECU sees a change of components and their values do not match it will show a check engine light. Similarly with the battery. If the ECU is seeing a new battery in your car that has more power in it compared to your old battery that barely made 10V. It will show a check engine light. In this case, you will need to learn how to reset car computer after replacing battery. And how you can do this work? We will learn later after we cover the symptoms of a bad ECU.
Also, similarly with the sensors, when these sensors go bad or you replace a sensor you will receive a check engine light. You will not know why this light turns on in the first place. That’s why you need to troubleshoot and later in the article when we will cover how to reset car computer after replacing battery, we will show you how to use an OBD2 scanner to get rid of these annoying errors.
Symptoms Of A Bad ECU
When the ECU goes bad it develops some symptoms that you are going to notice while you drive your car. The computer doesn’t go bad quite often but when it does, the work of the engine and all of the symptoms in the vehicle can go bad and this will result in poor engine performance from the vehicle. But what are these symptoms of a bad ECU? Let’s find out.
- Read more:
- Portable Jump Starter Not Charging – The Reasons and Things to Do
- How To Leave A Private Story On Snapchat in 2021
- 5 Fixes to Video is Still Processing on Google Drive & Google Photos
- How long Does it Take to Backup iPhone to iTunes/Computer?
- Restart a Frozen Microsoft Lumia 535 Without Losing Data
We elaborate on the symptoms because developing a check engine light on the dash is not quite a normal reaction from the computer. Since the car computer will not develop some problems when you replace a car battery. If it shows some errors then it could mean that there is something wrong with the computer as well.
Check Engine Light
If the car shows up with a check engine light for no reason or it shows a check engine light after you install a new battery then this could mean that there is something wrong with the computer. It’s either the computer is bad or it is confused.
A normal battery swap should not result in a check engine light on the dashboard and problems. The computer should learn by itself that there is a new battery and reset itself. But sometimes it doesn’t do that and you might have to experience some unpleasant situations like this with the check engine light.
Later in this article, we are going to explain how to reset a car computer after replacing a battery in detail. After we cover all of the symptoms of a broken ECU.
Engine Misfiring – Reset A Car Computer After Replacing Battery
Frequent misfires in the engine as well can indicate a bad or failing ECU unit. This is caused because the computer is not working properly and bugged out.
A failing ECU can be extremely difficult to diagnose since you only get the readings for the sensors that are located in the car. There is no ECU unit health check.
That’s why these symptoms like a check engine light and misfires you can confuse with other problems. Like bad spark plugs or bad engine coils. Since these components very often attribute to misfiring issues. That’s why you need to make sure that they are in perfect working order in order to prove that the computer is wrong.
But how can I check if the computer is wrong? The only way to check if the computer is bad is to remove the components one by one and test them with a multimeter. Testing them with a multimeter tool will tell you what really is going on inside of your engine. And if the computer is wrong and it needs replacing or resetting.
Resetting car computer after replacing battery is the easiest thing that you can do in this case. Because often the computer can get confused and cause problems with your vehicle. Later in this article, we are going to explain how you can address that.
Engine Does Not Like To Start
If the engine doesn’t like to start, then it is very likely that you have a computer problem or starter issue. The only way to see which of them has gone bad is to test the starter with a multimeter tool and see if the starter is any good. If the starter is good then you also need to test the solenoid.
This starter solenoid is a crucial component which when it fails it can develop issues and prevent the starter to turn on. The solenoid is transferring the power from the battery to the engine.
Also, if the car computer is broken the engine could still crank. But it is unable to start since a lot of crucial componentry that turns on will not turn on in this case and the engine will be dead.
The only way to revive it will be either by changing the car computer. Which in this case can be very expensive, or trying to reset the car computer. Later in this article, we are going to teach you how to reset car computer after replacing battery. But first, let’s cover all of the symptoms of a bad or an ECU that needs resetting.
Another problem with a failing ECU is that this problem can cause a severe power loss. Especially if the ECU cuts out some important components that are needed to keep the car moving.
These systems can be connected with fuel supply or ignition. The car will highly likely switch to a limp mode to protect the components. But if the ECU is not in proper order, you know that it needs resetting and the only way around this will be to learn how to reset car computer after replacing battery. Something that we are going to elaborate on in-depth in the next chapter.
Resetting the computer is one of the key things that you need to know when you are having a problematic computer unit in your vehicle. If the car computer doesn’t like to adapt and learn the new settings you have to do it by yourself. If it still doesn’t remove the check engine light you will probably need a new car computer. And that is something that we are going to cover later of how much is a car computer for your vehicle.
How To Reset Car Computer After Replacing Battery Simple?
Now we came to the most important part in which we will learn how to reset car computer after replacing battery.
If you have replaced your battery and you still get a check engine light then this chapter is perfect for you. Since we will share some invaluable information on how you can surpass this issue and enjoy your car. So, what’s the catch? There are two ways to reset a car battery. One of them is done manually and the other will involve messing with the diagnostic tool. Which of them works the best? Let’s find out.
Remove The Positive Terminal
The simplest trick in the book to reset a car computer is by removing the positive terminal from the battery. To remove the terminal, you will need a small wrench to access the bolt that is holding the battery clamp.
- Read more:
- Easily create a color palette in Illustrator from a photograph
- How Many Internet Browser Sessions Can Be Open At One Time?
- Learn how to Solid/Mirror an iPhone to a Chromebook
- How to Turn on Microphone on Tiktok in 2022 [TikTok Microphone]
- How to Pair Aftershokz Headphones: A Detailed Guide
Get a wrench that will fit the size and just loosen up the terminal. Then remove the cable in order not to touch the terminal.
Once removed, leave the car to sit like this for 5 minutes. Leaving the car without power will make sure that everything drains and the computer turns off. It is also useful to try to turn on the radio or other components that drain power to make sure that no electricity is left inside of the system.
After the time passes, reconnect the battery cable to the terminal. Tighten up the clamp and make sure that everything works properly. After this step, all of the systems should be turned on and there should be no more check engine light on the dash.
If this method doesn’t solve the problem for you to reset car computer after replacing battery. Make sure that you go through the next method.
Resetting A Car Computer With An OBD2 Scanner
This method will be perfect to reset car computer after replacing battery. With this method, you can be sure that your computer is reset and all the check engine lights or other errors are removed from your system. This will result in no check engine light on the dash and a perfectly working car. So, how you can do this?
To do this practice, you will need a diagnostics tool. Also called an OBD2 scanner. You can find these scanners for a cheap price online and they are readily available. A good OBD2 scanner will cost you more money. But it’s worth it. The more option the scanner has, the more easily it will be for you to diagnose an issue. Since most cheap scanners only show you the error codes and you have to look for them online.
The best tools are the ones that can connect with your mobile phone and have a mobile app. With this app, you will have no trouble of reset car computer after replacing battery.
You only need to connect the tool to your OBD2 port. This port is usually located under the steering wheel. Then you open the app and let the app scan for codes. If there are any codes on your computer, the app will show them to you and you will have the option to erase them altogether from your system.
Once erased, turn off your car and then restart the car. Scan the car again with the tool. If the error still persists this means that you have a bigger issue. Make sure that you read the codes and learn more about them and troubleshoot the issue. Here is a video of how this work is done.
Take Your Car To Be Diagnosed – Reset A Car Computer After Replacing Battery
The last way to get this done is at a shop. There are shops that are doing full diagnostics and this will cost you some money to get your car diagnosed and the reset car computer after replacing the battery possible.
This service is going to cost you somewhere between $50 to $150 to get all the codes deleted and removed from your system. But this doesn’t mean that they will not return again. But if the check engine light a false positive from a battery replacement it should be gone.
Reset Car Computer After Replacing Battery Cost?
Resetting the computer of your car if you only remove the positive terminal on your battery will cost you 0 dollars and you can do this work at your home with no previous car knowledge.
The next way is to take your car to a shop. Let the mechanics do this work on your car and remove all the codes. This will cost you somewhere between $50 to $150. This way is perfect for people who don’t want to mess with their cars and just want their problems out of their life.
The third way is to do it by yourself. Get an OBD2 scanner tool, if you get one that you could connect with a mobile phone would be perfect. Since these tools tell you a lot more than the cheap $30 scanners. This tool can be pricier and you could pay around $100 or more for this tool.
Scan the car for codes and remove them. This will reset all of the settings. If the check engine light still persists and you experience some problems with the overall engine operation and the car is in perfect mechanical order. Maybe the ECU is somewhat broken. The worst symptoms that you can feel as we said are the car not starting or shut down all of sudden. In this case, you know that you have a problem.
Conclusion – Reset A Car Computer After Replacing Battery
In this article, we have covered a lot when it comes to check engine light problems concerned to the car battery. We learned what is a car battery and how it works. Then we learned what is the ECU and how the ECU is controlling all the systems in your car.
Then we have covered all of the symptoms of a broken ECU since one of the problems of this unit is when it breaks it sends check engine lights on the dashboard for no particular reason. Like in our example, you install a new battery and you get a check engine light. Something that doesn’t make sense.
Then we learned how you can get rid of the check engine light and how to reset the computer. There is the removing the power supply method. Which involves removing the positive cable from the terminal. Then taking your car to a diagnostics shop and the last method is to reset a car computer after replacing battery by yourself using an OBD2 scanner tool. Any way works, it depends on you how you want to tackle the problem.
These tools have been tried and tested by our team, they are ideal for fixing your car at home.